The wire rope vibration isolator is made by winding the wire rope into a spiral shape and fixing it between two metal plates arranged along the nut. Its stiffness and damping depend on the diameter, number of strands, number of turns, winding method and size of the wire rope. .It is a new type of vibration isolator with nonlinear characteristics and dry friction damping. It uses a steel wire rope that is wound in a certain direction with multiple strands of steel wire as an elastic element. It has obvious hysteresis characteristics. Friction, squeezing, slipping.
The product is a vibration isolator for camera, cable suspension system and isolator bracket.
GR5-27D-A professional aerial photography wire rope vibration isolator is one of the GR5 series wire rope vibration isolators. This model is made of stainless steel wire rope with a diameter of 4.0mm wound along the upper and lower splints, and can withstand the maximum static load It is 27N (2.76kg), with corrosion resistance, impact resistance, high and low temperature resistance and other properties. GR5-27D-A professional aerial photography wire rope vibration isolator can eliminate the continuous vibration in the process of mobile photography, as well as the sudden vibration caused by bad road conditions, and eliminate the low vibration caused by reducing the vibration between the photography equipment and the vehicle-mounted mobile equipment. High-quality picture, so as to achieve the purpose of barrier-free and clear imaging and recording.
GR series professional aerial photography wire rope vibration isolators are especially suitable for vibration isolation and buffering of precision instruments due to their delicate and flexible shape and light weight. They are now widely used in photography equipment, aerial photography equipment, communication devices, electronic sensing equipment, Vibration isolation buffer for mobile electronic instruments and surveillance cameras.