The wire rope vibration isolator is made of wire rope wound into a spiral shape and fixed between two metal plates arranged along the nut. It is a new type of vibration isolator with nonlinear characteristics and dry friction damping. The steel wire rope, which is formed by winding the steel wire in a certain direction, is used as an elastic element.
The length is more than 11cm, the width is 4cm, the height is more than 3cm, and there is a strip rubber pad inside
The GX-30A wire rope vibration isolator has a nominal load of 30N (3.06kg) in the Pz direction. It is an improved isolator based on the GH wire rope vibration isolator in order to prevent the wire rope from yielding failure under strong impact after the introduction of GJB-150. In addition to meeting the performance of the GH type wire rope vibration isolator, the shock absorber has also been greatly improved, and can meet the shock resistance requirements of up to 100G or more. It is suitable for armored vehicles, self-propelled artillery, airborne, vehicle-mounted , shipborne and other electronic, mechanical equipment, computers and instruments in harsh environments such as high and low temperature, chemical pollution and other harsh environments, vibration isolation buffer, missile satellite carrier, navigation and launch system safety protection and industrial noise reduction of various industrial power machinery Vibration isolation, etc.