The JGX-0648D-68A wire rope mount is designed for equipment that needs more movement under vibration and shock rather than an overly rigid mounting connection.

With a 54 mm height, 64 mm width and approximately 0.492 kg unit weight, the 68A sits below the 79A in load capacity but provides greater available deflection. This makes it a practical choice for electronic assemblies, transportation equipment, industrial controls and precision instruments exposed to repeated vibration or transient shock.

The multi-loop wire rope structure provides the spring and damping action without relying on a conventional rubber element.

The JGX-0648D-79A wire rope mount is a compact, high-load model in the JGX-0648 series, developed for equipment exposed to vibration, repeated movement and mechanical shock.

With a height of only 48 mm and a width of 56 mm, the 79A provides substantial load support within a relatively small installation envelope. Multiple stainless steel wire rope loops form the main elastic element, allowing the mount to deform under dynamic loading and dissipate vibration and shock energy.

Its compact construction makes it suitable for airborne equipment, transportation systems, industrial controls and precision instruments where both installation space and mechanical protection matter.

Unlike a conventional Rubber wire rope isolator or elastomer-based vibration mount, the JGX-0480D-61A uses stainless-steel wire rope loops as its primary elastic and damping element.

When the supported equipment moves, the wire strands bend, slide and interact internally. Part of the mechanical energy is dissipated through friction between the individual strands. This gives the mount damping capability without adding a separate damping component.

The 61A version is particularly useful where the equipment requires higher stiffness and limited displacement rather than a very soft suspension.

Compact Isolation for Heavier Equipment
Space and load capacity often conflict in vibration-control design. A heavier assembly needs sufficient support, but increasing isolator size is not always possible inside cabinets, machinery or mobile equipment.
The JGX-0480D-61A is designed around this problem.
At only 36 mm high, it supports a maximum static compression load of 61 kg per isolator, providing higher load capacity while keeping the mounting profile compact.

More Isolation Travel in a Compact Wire Rope Mount
The JGX-0480D-37A combines a relatively soft load response with a compact mechanical structure. Compared with the higher-load models in the JGX-0480 family, its larger available deflection allows the wire ropes to move further as mechanical loads are applied.

The GZQ-5.2-SC1 Mount Isolator is a compact vibration and shock control component developed for lightweight equipment where installation space and mechanical stability are equally important.

Its low-profile body makes it well suited to camera systems, aerial surveying equipment, airborne communication modules and other compact electronic assemblies. When installed between the equipment and its supporting structure, the isolator helps reduce the transmission of continuous vibration and short-duration mechanical impact.

Unlike larger industrial isolation mounts, the GZQ-5.2-SC1 is designed around applications where small size, low added weight and flexible mounting are key considerations.

It can be used as a Vibration Isolator Mount, Rubber Vibration Isolator or Anti Vibration Damper in compact equipment installations.

The JGX-0400D-17.5A represents the softest end of the JGX-0400 stiffness range.

Its mechanical characteristics differ significantly from the higher-load models. As the maximum static load decreases, the cable geometry provides progressively greater deflection and lower stiffness.

For the 17.5A, this reaches:

58 kN/m vibration stiffness
23 kN/m shock stiffness
32.0 mm maximum primary deflection

The increased movement allows the wire rope structure to flex substantially under mechanical input.

This characteristic can be useful for vibration-sensitive electronic equipment, measuring systems and lightweight assemblies where a higher-stiffness mounting interface may provide less mechanical compliance than required.

The JGX-0400D-22A wire rope isolator is a flexible vibration-control solution for equipment that benefits from lower mounting stiffness and increased mechanical travel. Rated for a maximum static load of 22 kg in the primary loading direction, it combines 24.9 mm maximum deflection with a vibration stiffness of 84 KN/m.

These characteristics distinguish the 22A from the firmer models in the JGX-0400 Series. Rather than restricting equipment movement with a high-stiffness support, the cable structure provides additional compliance so that vibration-induced displacement can be accommodated within the isolator.

Constructed around stainless steel wire rope loops and a compact metal mounting structure, this wire rope mount is suitable for electronic assemblies, instrumentation, mobile systems and other equipment where vibration and mechanical shock are both part of the operating environment.

The JGX-0400D-26A wire rope isolator is designed for equipment that requires more isolation travel while maintaining a practical level of load support. With a 26 kg maximum static load, 19.8 mm maximum deflection, and 116 KN/mm vibration stiffness in the primary loading direction, it offers a more compliant mechanical response than the higher-load JGX-0400D-37A and JGX-0400D-31.5A models.

Its stainless steel cable loops flex under vibration and impact, allowing controlled movement between the equipment and its supporting structure. This makes the JGX-0400D-26A particularly relevant when reducing transmitted mechanical energy is more important than maintaining a very rigid mounting interface.

The compact all-metal configuration also allows this wire rope mount to be integrated into electronic equipment, instrumentation, communication systems, mobile platforms, and industrial assemblies where vibration and mechanical shock must be considered together.

The JGX-0400D-31.5A is a compact wire rope isolator developed for equipment that needs a practical balance between load support, vibration control, shock attenuation, and allowable movement.

Rated for a maximum static load of 31.5 kg in the primary loading direction, this model provides 14.7 mm maximum deflection and 170 KN/mm vibration stiffness. Compared with the stiffer 37A version in the same JGX-0400 family, the 31.5A allows greater mechanical movement under load, making it a useful option when engineers need more compliance without moving to a significantly softer isolator.

Its stainless steel cable loops and metal mounting structure form a compact wire rope mount that can be integrated into electronic equipment, instrumentation, mobile platforms, control assemblies, and other systems exposed to vibration and mechanical shock.

The JGX-0400D-37A Wire Rope Isolator is a compact all-metal isolation component designed for equipment that requires controlled movement, mechanical shock protection, and stable support within a limited installation space.

With a maximum static load of 37 kg, a compact 30 mm × 41 mm profile, and a vibration stiffness of 222 KN/mm in the primary loading direction, this model is particularly suitable for installations where excessive displacement is undesirable.

Unlike elastomer-based mounts, the JGX-0400D-37A uses a stainless steel cable structure to provide mechanical flexibility and energy dissipation without relying on rubber elements. Its compact construction makes it a practical wire rope mount for electronic assemblies, mobile equipment, instrumentation, control systems, and other installations exposed to repeated vibration or mechanical shock.

The JGX-0240D-4.5A Wire Rope Isolator is designed for equipment that must remain stable under continuous vibration, repeated shock and changing environmental conditions.

Its wire-rope structure provides flexibility in multiple directions while dissipating mechanical energy through friction between individual wire strands. Unlike conventional elastomer mounts, it does not depend on rubber as the primary elastic element, making it well suited to applications where temperature variation, aging and long-term reliability are important considerations.

With a compact metal construction and broad environmental adaptability, the JGX-0240D-4.5A can be used as a wire rope mount for transportation equipment, industrial control systems, electronic assemblies and machinery exposed to repeated mechanical disturbance.