Anti Vibration Mounts
Anti Vibration Mounts are dedicated base damping fittings for mechanical equipment. Various structured anti vibration mounts from Hoan Microwave adopt metal base filled with damping compound, becoming preferred base accessory for power units and telecom cabinets. Balanced vertical and horizontal stiffness realizes wide-band vibration filtration with tunable damping ratio, featuring moisture & salt spray resistance for industrial fans and vehicle power equipment. Three installation options: floor fixing, sidewall mounting and inclined embedding keep these compact anti vibration mounts from redundant space occupation and reduce resonance damage during machine startup. Practically, the anti vibration mounts often combine with brand’s wire rope isolators to build composite vibration reduction system for stable load bearing and long-term isolation. Hoan Microwave modifies base thickness and damping proportion to develop custom non-standard anti vibration mounts based on equipment weight and operating frequency.
Send your inquiry
Small electronic systems are often affected by low-amplitude vibration that is easy to overlook. Over time, this vibration may loosen fasteners, disturb image quality or place repeated stress on internal components.
The GZQ-4.2-SC uses a resilient damping element inside a protective black housing. The structure supports the mounted equipment while dissipating part of the vibration energy before it reaches the protected device.
Compared with a basic rigid mounting connection, this Rubber Vibration Isolator adds a controlled flexible interface between the equipment and its supporting platform. The result is better mechanical protection without requiring a large installation envelope.
The GZQ-4.2-SC uses a resilient damping element inside a protective black housing. The structure supports the mounted equipment while dissipating part of the vibration energy before it reaches the protected device.
Compared with a basic rigid mounting connection, this Rubber Vibration Isolator adds a controlled flexible interface between the equipment and its supporting platform. The result is better mechanical protection without requiring a large installation envelope.
The GZQ-3.2-SC Mount Isolator is a compact Rubber Vibration Isolator developed by Xi'an HOAN Microwave Co., Ltd. for lightweight electronic equipment operating in environments exposed to continuous vibration and occasional shock. Designed with a compact cylindrical structure, it offers reliable vibration isolation while occupying minimal installation space.
With a 3.2 kg nominal load capacity, the GZQ-3.2-SC is suitable for precision devices such as aerial cameras, UAV payloads, communication modules, optical instruments, portable monitoring systems, and lightweight industrial electronics. Its balanced damping characteristics help reduce vibration transmission, improve equipment stability, and extend service life in demanding field applications.
With a 3.2 kg nominal load capacity, the GZQ-3.2-SC is suitable for precision devices such as aerial cameras, UAV payloads, communication modules, optical instruments, portable monitoring systems, and lightweight industrial electronics. Its balanced damping characteristics help reduce vibration transmission, improve equipment stability, and extend service life in demanding field applications.
The JWZ-T1-1.2A Friction Damping Isolator is a compact, high-damping vibration isolation solution specifically engineered for lightweight precision equipment operating in harsh dynamic environments. Designed around an advanced friction damping mechanism rather than traditional elastomer materials, it provides outstanding resistance to vibration, mechanical shock, and resonance while maintaining a remarkably small installation footprint.
As a precision spring damper, the JWZ-T1-1.2A combines the advantages of a spring isolator and a Friction Damper, offering stable dynamic performance even under repeated shock loading. It is particularly suitable for aerospace electronics, naval instruments, military vehicle systems, and other compact installations where every millimeter of mounting space matters.
As a precision spring damper, the JWZ-T1-1.2A combines the advantages of a spring isolator and a Friction Damper, offering stable dynamic performance even under repeated shock loading. It is particularly suitable for aerospace electronics, naval instruments, military vehicle systems, and other compact installations where every millimeter of mounting space matters.
The JWZ-T1-0.3A Friction Damper is the smallest-capacity model in the JWZ-T1 Series. It features a compact cylindrical stainless steel body with a square mounting flange, providing easy installation while maintaining exceptional structural rigidity.
Its internal friction damping mechanism dissipates vibration energy efficiently without relying on rubber components, ensuring consistent performance across a wide temperature range and throughout a long service life.
Whether installed in precision instruments, aerospace electronics, communication equipment, or optical devices, the JWZ-T1-0.3A provides reliable vibration isolation where space is limited but performance is critical.
Its internal friction damping mechanism dissipates vibration energy efficiently without relying on rubber components, ensuring consistent performance across a wide temperature range and throughout a long service life.
Whether installed in precision instruments, aerospace electronics, communication equipment, or optical devices, the JWZ-T1-0.3A provides reliable vibration isolation where space is limited but performance is critical.
The JWZ-T1-0.45A Friction Damping Isolator addresses these challenges by utilizing a precision friction damping structure capable of efficiently dissipating vibration energy while maintaining an extremely compact footprint.
Its miniature size, robust all-metal construction, and high damping characteristics make it an excellent solution for protecting precision electronics against vibration, mechanical shock, and transportation loads.
Its miniature size, robust all-metal construction, and high damping characteristics make it an excellent solution for protecting precision electronics against vibration, mechanical shock, and transportation loads.
As a compact Spring Damper, Spring Isolator, and Shock and Vibration Isolator, the JWZ-T1-1.4A delivers stable performance in demanding industrial and defense environments.
JWZ-1-3.5A All-Metal Vibration Isolator provides reliable vibration protection for laboratory equipment, aerospace electronics, and sensitive instruments. Compact, temperature resistant, maintenance-free anti-vibration mount from HOAN.
Discover the JWZ-1-3.0A All-Metal Vibration Isolator from HOAN. A compact anti-vibration mount designed for laboratory equipment, aerospace electronics, and sensitive industrial instruments with reliable temperature-resistant performance.
The JWZ-1-2.0A All-Metal Isolator is a compact, high-performance friction damping vibration isolator engineered for precision equipment operating in harsh mechanical environments. Unlike conventional rubber mounts, the JWZ series adopts an all-metal friction damping structure, providing long-term vibration isolation performance without material aging, cracking, or deformation.
Designed for applications requiring reliable vibration attenuation, impact protection, and environmental durability, the JWZ-1-2.0A is widely used in laboratory instruments, aerospace electronics, optical systems, communication equipment, industrial control devices, and other sensitive electronic equipment where vibration stability directly affects operational accuracy.
Designed for applications requiring reliable vibration attenuation, impact protection, and environmental durability, the JWZ-1-2.0A is widely used in laboratory instruments, aerospace electronics, optical systems, communication equipment, industrial control devices, and other sensitive electronic equipment where vibration stability directly affects operational accuracy.
The JWZ-1-1.5A All-Metal Isolator is a compact friction damping vibration isolator designed to protect precision instruments and electronic equipment from vibration, mechanical shock, and structural resonance. Unlike conventional rubber mounts, the JWZ series adopts an all-metal damping structure, providing consistent isolation performance across a wide temperature range while maintaining excellent durability and long service life.
Its compact footprint, corrosion-resistant stainless steel housing, and maintenance-free design make it an excellent solution for laboratory instruments, aerospace electronics, military equipment, optical devices, communication systems, and other high-value precision equipment where vibration control is critical.
Designed and manufactured by Xi'an HOAN Microwave Co., Ltd., the JWZ-1-1.5A delivers reliable vibration isolation without the aging problems commonly associated with elastomeric mounts.
Its compact footprint, corrosion-resistant stainless steel housing, and maintenance-free design make it an excellent solution for laboratory instruments, aerospace electronics, military equipment, optical devices, communication systems, and other high-value precision equipment where vibration control is critical.
Designed and manufactured by Xi'an HOAN Microwave Co., Ltd., the JWZ-1-1.5A delivers reliable vibration isolation without the aging problems commonly associated with elastomeric mounts.
The assembled vibration isolator (JMZ) is a device used for damping and vibration isolation, typically applied in buildings or machinery. It consists of springs, dampers, and supporting structures, effectively reducing the impact of external vibrations on buildings or equipment, thereby enhancing stability and safety.
The assembled vibration isolator (JMZ) is a device used for damping and vibration isolation, typically applied in buildings or machinery. It consists of springs, dampers, and supporting structures, effectively reducing the impact of external vibrations on buildings or equipment, thereby enhancing stability and safety.
Our products are widely used in various technical fields, including military electronic equipment, aerospace communication, post and telecommunications, civil electrical appliances, and instruments.
Useful Links
Products
Contact Us
Tel: +86 18740357801
Add: Room 10701, Unit 1, Building 2, Xinkai Industrial Park, North of Jinye 2nd Road and West of Lihua South Road, High tech Zone, Xi'an City
Copyright © 2026 Xi'an Hoan Microwave Co., Ltd. - www.hoanisolators.com |Sitemap