JGX-0480D-37A Wire Isolator for Shock & Vibration Control
JGX-0480D-37A Wire Isolator
The JGX-0480D-37A wire isolator is designed for equipment that requires relatively soft mechanical support with greater movement under vibration and shock.
Its stainless steel wire rope structure dissipates mechanical energy through cable bending and friction rather than relying on a conventional rubber spring. With a 37 kg maximum static load in compression and 26.9 mm maximum compression deflection, this model is particularly suitable where greater compliance is required within the JGX-0480 series.
The compact all-metal construction also makes the JGX-0480D-37A a practical wire rope shock absorber for industrial equipment, electronic enclosures, transport systems and machinery operating under changing environmental conditions.
Key Product Advantages
Greater mechanical compliance
The 37A configuration provides up to 26.9 mm compression deflection, allowing more movement before reaching its rated static load.
Progressive wire rope response
The stainless steel cable loops bend and interact under load, producing the characteristic nonlinear response of a Wire Isolation Mount.
Vibration and shock capability
The catalogue specifies different stiffness values for vibration and shock conditions, helping engineers evaluate the mount according to the actual loading direction and operating condition.
All-metal isolation structure
No conventional rubber spring is used. This avoids many of the environmental limitations normally associated with elastomer-based mounts.
product details
Product Dimensions
| Model | Height (H) | Width (W) | Mounting Method | Clearance Hole Size | Thread Specification | Countersink Angle |
| JGX-0480D-75A | 30 | 36 | D | ∅6.9±0.13 | M6×1.0 | 90 |
| JGX-0480D-72A | 33 | 38 | ||||
| JGX-0480D-61A | 36 | 41 | B,D,E | |||
| JGX-0480D-59A | 38 | 43 | A,B,C,D,E,S | |||
| JGX-0480D-52A | 41 | 46 | ||||
| JGX-0480D-50A | 43 | 48 | ||||
| JGX-0480D-37A | 51 | 58 | ||||
| JGX-0480D-24A | 54 | 75 | ||||
| JGX-0480D-18A | 62 | 88 | ||||
| JGX-0480D-12A | 81 | 107 |
Product Data Sheet
| Curve No | Model | Max. Static Load (N) | Max. Deflection (mm) | Vibration Stiffness (KN/m) | Impact Stiffness (KN/m) |
| 1 | JGX-0480D-75A | 75 | 8.6 | 578 | 363 |
| 2 | JGX-0480D-72A | 72 | 11.7 | 455 | 252 |
| 3 | JGX-0480D-61A | 61 | 13.7 | 347 | 189 |
| 4 | JGX-0480D-59A | 59 | 15.7 | 301 | 152 |
| 5 | JGX-0480D-52A | 52 | 18.8 | 244 | 117 |
| 6 | JGX-0480D-50A | 50 | 20.8 | 212 | 96 |
| 7 | JGX-0480D-37A | 37 | 26.9 | 136 | 58 |
| 8 | JGX-0480D-24A | 24 | 29.5 | 82 | 33 |
| 9 | JGX-0480D-18A | 18 | 36.6 | 54 | 21 |
| 10 | JGX-0480D-12A | 12 | 52.8 | 29 | 10 |
Product Display
Typical Applications
The JGX-0480D-37A can be considered for:
- Industrial electronic cabinets
- Mobile and vehicle-mounted electronics
- Communication equipment
- Measurement and monitoring systems
- Pumps and auxiliary machinery
- Outdoor equipment enclosures
- Transport and rail equipment
- Shock-sensitive mechanical assemblies
Its combination of relatively low stiffness and greater deflection makes it especially useful when equipment requires more movement from the isolation system rather than a rigid support.
What Does the 37A Configuration Solve?
A vibration mount should not be selected only by physical size. If the mount is too stiff for the supported equipment, the system may not provide enough movement to isolate the disturbing vibration effectively.
The JGX-0480D-37A addresses applications where more deflection and lower stiffness are preferred while retaining the durability of an all-metal wire rope shock absorber.
Take a look around our website. If you have a query or you need advice, We'll take time to help you. If you require the top-quality products, feel free to contact us.